10 Best Drill Machine In India

Table of Contents

Tools are important for our daily life which are needed to fix anything.

Whether it is to fix a broken nail in the wall, build a shelf for your bedroom, to hang a photograph or anything out of a whole lot of things you could do, tools are certainly necessary and must be possessed by every household in the country. Drill machine is one of the most important tools that help us get out of a sticky situation fast.

For example, if you have a leak in your kitchen, with your superior skills at deduction, you have managed to trace the leak down to a pipe beneath your kitchen sink. But what next? Simply calling the plumber and waiting is not a plausible solution. Because in the time that the plumber will take to arrive and finally start working, your kitchen would have been flooded quite a lot, leaving you with more work than you had in the first place.

That situation is more difficult. You would now have to worry not just about the broken pipe, but also the mess that has been made in your house. The other option, and the more feasible one in our opinion, is for you to get some tools yourself and try and start working on the problem.

All you would need to do is grab hold of a couple of pliers and tighten the pipe so that the leaking stops. There, you have just saved yourself the trouble of calling a plumber, as well as the associated costs.

It is perhaps, now safe to say that every household does require an efficient set of tools that they could use to combat any kind of situation that may come up at any time. But talking of tools, there are some which are not that easy to use and require more of a technical background to operate.

While it is true that most of these tools are simple enough to be operated by anyone, a couple of them, if used without any prior experience or any present guidance, could result in an injury as well. It is with these tools that we implore you to be extremely careful. One of these is the drilling machine.

The drilling machine is a great tool for those people who know exactly how to operate it but those who don’t, it is important that they first learn and then proceed, as any carelessness while using it could easily lead to a fatal accident. It is a very important power tool that can actually be used to carry out a lot of heavy work and without putting in much of human effort. As it runs on electricity, it doesn’t require much of human strength.

All it needs is that you position it with clarity and utmost accuracy, as any mistakes made cannot be undone. Also, you must have steady hands, as is the case with a lot of other tools as well, as even the least amount of slipping could result in you drilling a hole somewhere you were not supposed to.

It is actually quite popular simply due to the fact that is quite easy to use for the kind of work that it does. It is used in households, factories, workshops, and industries and used almost regularly by carpenters and mechanics. Common uses of the drilling machine include fastening materials together by drilling through them, boring holes in concrete walls and even making and building furniture.

Remember that a drill machine is responsible for a lot, and if any problems happen to arise during its use, serious harm may be caused. To avoid that, it is best that you only pick out the best drill machine for home use in India and nothing less. But in order for you to be wise enough to identify which one that is, you need some background information. 

In this article, we will introduce you to some of the most critical features that a drilling machine must possess and you must look for. We will also let you know about some features that differ slightly in different variants and leave it up to you to decide what suits you the best.

Furthermore, we will also be going over some of the best options when it comes to drilling machines and then let you decide for yourself which one impresses you the most.

BLACK and DECKER Hammer Drill Machine KR554RE 550-Watt 550 watts2800 rpm1 yearSee At Amazon
Bosch Drill Machine GSB 500W 10 RE Professional Tool Kit500 watts2600 rpm6 monthsSee At Amazon
Black And Decker Drill Machine HD400in 500-watt 10mm Hammer Drill500 watts3000 rpm1 yearSee At Amazon
Bosch Professional Impact Drill Machine 06012161F3 GSB 10 RE 500-Watts 500 watts2600 rpmNot Mentioned See At Amazon
DCC POWERTOOLS Drill Machin 800W VI-POWER 2-26800 wattsNot Mentioned6 monthsSee At Amazon
IBELL Rotary Hammer Drill Machine RH26-24800 watts900 rpm6 monthsSee At Amazon
BROACH DCC 2-20 Rotary Hammer Drill Machine with complete set 500 WattsNot Mentioned 6 monthsSee At Amazon
Cheston 10 mm Dual Speed Drill Machine 1500mAh Battery Capacity600 rpm6 months See At Amazon
JCB 13RHI 780W Drill Machine with Forward and Reverse780 rpmNot MentionedNot MentionedSee At Amazon
Cheston Rotary Hammer Drill Machine 20MM 500W 500 watts850 RPM6 monthsSee At Amazon

Below are some of the selected Best Drill Machines in India 2020

1. BLACK and DECKER Hammer Drill Machine KR554RE 550-Watt 

BLACK and DECKER Hammer Drill Machine KR554RE 550-Watt

View at Amazon


  •  Power: 550 watts, chuck capacity: 13mm, impact rate: 0-47, 600 Bpm, speed: 0-2, 800 Rpm; No load speed: 0-2800 rpm
  •  Max drilling capacity: wood- 20mm, steel- 13mm, masonry- 13mm, cable: 2m long 550 watts suitable for home drilling
  •  Drilling or Hammering mode provides the power and speed to drill into masonry, steel and wood
  •  Variable speed for ultimate finger tip control for all drilling applications

Black & Decker is a known and respected brand when it comes to drilling machines. They have been marketing these products for quite long and happen to know exactly what the customers want. This one comes with a power rating of 550 watts and a chuck capacity of 13 mm.

While the impact rate has been specified at 0-47 at 600 bpm, the speed is 0-2 at 800 Rpm. As far as max drilling capacity is concerned, it varies in different amounts for different materials. For example, it is 20mm for wood, 13mm for steel and finally 13mm for masonry.

The cable provided along with the product is 2 m long and is rated 550 watts which is completely suitable for home drilling purposes. There is a drilling or hammering mode in the product which is used to extract the power and speed required for drilling into masonry, wood or steel.

There is the essential variable speed feature which facilitates ultimate fingertip control for not just one but all kinds of drilling applications. There is also a reverse brush system that facilitates full torque and power in both directions, forward and reverse. In addition, they have also given a lock-on button which can be used for continuous use.

The design of the machine is quite ergonomic and it comes with optimal grip positions and an insulated plastic body that is also shockproof. Furthermore, you get added ease when comes to changing bits and also a lightweight body.

The contents of the package include one drill machine, 1 depth gauge, one chuck key, four drill bits, wooden as well as concrete in material, and one auxiliary handle. Finally, you also get a 6 months comprehensive warranty on the product.

2. Bosch Drill Machine GSB 500W 10 RE Professional Tool Kit

Bosch Drill Machine GSB 500W 10 RE Professional Tool Kit

View at Amazon


  • No-load speed : 0 to 2600 rpm
  • Drilling diameter: 10 millimeters for concrete and masonry; 8 millimeters for steel; 20 millimeters for wood
  • Material: MS and Plastic
  • Chuck capacity : 1 to 10 millimeters
  • Impact rate : 0 to 41600 bpm
  • 1/2 inch drill spindle connecting thread
  • Power: 500 watts (Input) and 250 watts (Output)

Bosch is a brand that has made its presence felt worldwide and is quite famous for marketing all kinds of products. They are known mostly for the quality of their products in addition to the customer service they provide.

This one comes with a warranty of 6 months from the date that is listed on your bill or invoice. You will need to produce the invoice claim to claim your warranty.

It is a two-in-one drill and screwdriver set, the Bosch GSB 10 RE kit is perfect for both beginners as well as professionals. Whatever the problem is, this drill will become your best friend with its many accessories. It will ensure that you never need to call the repairman anymore.

The most compact in its range, with an ergonomic design that is easy for beginners and experts alike, it comes in a tool kit that accommodates 100 accessories covering everything you will need while working.

The no load speed of the drilling machine has been specified as 0 to 2600 rpm while the drilling diameter has been listed as 10 millimeters for concrete as well as masonry, 20 mm for wood and finally 8 mm for steel. The materials used for the construction are MS and steel while the chuck capacity ranges between 1 to 10 millimeters. Finally, the impact rate has been specified as 0 to 41600 bpm.

3. Black And Decker Drill Machine HD400in 500-watt 10mm Hammer Drill

Black And Decker Drill Machine HD400in 500-watt 10mm Hammer Drill

View at Amazon


  • 500 watts power ideal for all domestic and semi professional tasks. Non-reversible function
  • Ergonomically designed for ease of handling and e efficient cooling system
  • 10mm chuck ideal for all types of domestic tasks
  • Can be used for drilling on any kind of surface like concrete, wood and metal
  • Lock on button for ease of operation
  • Mode selection for Impact/drill mode
  • Warranty: 6 months comprehensive on the product
  • Power: 500 watts Voltage: 220 volts
  • Chuck Size : 38.1 mm

Another product from Black & Decker has made it to our list, and all because they have been consistently shelling out features worth a look and products well worth your money.

This one carries a power rating of 500 watts which is enough to handle not just household tasks, but also some semi-professional ones. It has a nonreversible functionality and has been designed ergonomically. Due to its design, it is quite easy to handle and, in fact, also comes with an efficient cooling system.

This was a necessary feature as these machines often get pretty heated up after prolonged usage, and a cooling mechanism will keep the heat to a minimum and essentially extend the life of the machine.

It also comes with a 10 mm chuck which is considered quite ideal for all kinds of domestic tasks. There is also the fact that it can be used for drilling on some pretty diverse materials like metal, wood, and concrete without experiencing any problems.

There is lock-on button that aids the ease of operation and is used for continuous usage. You have the option to switch the mode between impact and drill. The warranty on the product lasts for 6 months and is comprehensive in nature while the voltage rating of the product is 220 volts. The chuck size is 38.1 mm while the package contains one drill machine, one warranty card, one key and a manual.

4. Bosch Professional Impact Drill Machine 06012161F3 GSB 10 RE 500-Watts 

Bosch Professional Impact Drill Machine

View at Amazon


  • No Load Speed: 02600 rpm
  • Impact rate at, no load speed 41600 bpm
  • Drilling Diameter Concrete: 10 mm
  • Chuck Capacity: 110 mm; Drilling Diameter Wood: 20 mm
  • Item Weight: 1.5 Kg
  • Drill rod / Drill bit not included
  • Offering a maximum drilling capacity on steel up to 8 mm, on wood up to 20 mm and on concrete up to 10 mm 

The following product is just another example of the excellence that the Bosch brand consistently delivers which makes them one of the best drill machine in India. They don’t just offer great products but also complement them with equally competent services.

This one comes with a no load speed of 02600 rpm while the impact rate at the no-load speed is 41600 bpm. Furthermore, it has a drilling diameter of 10 mm for concrete while the same quantity for wood is 20 mm.

The chuck capacity is 110 mm while the product weighs 1.5 kg which makes it sufficiently lightweight to be handled with ease and used comfortably. Please note however that the drill rod or drill bit is not included with the product itself and must be bought separately.

5. DCC POWERTOOLS Drill Machin 800W VI-POWER 2-26

DCC POWERTOOLS Drill Machin 800W VI-POWER 2-26

View at Amazon

This next one has been proven to be extremely effective when it comes to drilling anchors or fixing and patching up the holes you might find in concrete and masonry. It actually comes with a warranty for the machine that lasts for six months. It works great when it comes to heavy drilling in masonry and similar jobs.

Furthermore, it comes with three different modes. Each of these modes have a functionality of their own and can be used uniquely in different situations. The product even comes with as many as three different hammer drills for concrete, granite, marble and wall.

Additionally, it also has two pieces chisel and is essentially equipped enough to handle all kinds of drilling needs and requirements. Out of the three modes it comes with, the rotary drill mode is perhaps the most useful. It can be used for simple drilling as well as driving applications. On the other hand, the hammer drill mode allows the user to carry out heavy drilling in masonry.


  • Ideal for drilling anchors and fixing holes in concrete or masonry 
  • 6 months machine warranty
  • Ideal for heavy drilling in masonry
  • Provided with 3 different modes
  • 3 hammer drills for wall, marble, concrete and granite and 2 pieces chisels

6. IBELL Rotary Hammer Drill Machine RH26-24

IBELL Rotary Hammer Drill Machine RH26-24

View at Amazon


  • Parking stand/stick with 360-degree angle rotation
  • Works with full ease and effortless sharp drills making the workload much simpler and easier for you
  • It comes with a strong plastic case to make it portable
  • The machine is protected with high-Quality Carry Case , Adapter ,Manuel Chuck , Chuck Key and Scale

The IBELL Rotary Hammer Drill Machine RH26-24 comes with some unique features that you won’t find elsewhere. It looks great and is also shaped in a way that will let you hold it for maximum impact with minimum effort. It comes with the feature of variable speed. You can set it depending on the kind of material you are drilling into. For example, if you are drilling into wood, you might want to set a relatively slower speed, but for concrete, you would want to increase the speed up a few notches.

That way, you can be sure that you get the best results every time you drill. It even comes equipped with an auxiliary handle and a depth stop which is adjustable in the sense that it can be rotated as per your will and a full 360 degrees which will ensure that you get full ease of usage and no difficulties.

The softgrip handle that the machine comes with ensures that you get the best possible grip and a highly secure hold. Finally, the drill machine is not just great at drilling holes at a fast speed but can also be used in reverse operation, and that too at high torque.

7. BROACH DCC 2-20 Rotary Hammer Drill Machine with complete set 

BROACH DCC 2-20 Rotary Hammer Drill Machine with complete set

View at Amazon


  • Hammer powerful drill machine set with 3 drill bits and a carry case 500 watt 20mm
  • Soft grip for and fatigue use
  • Lock-on button for continuous drilling
  • Infinitely variable speed control for easy adjustment of speed infinitely variable speed control for easy adjustment of speed
  • Drill through concrete, metal or wood with this rotary hammer drill from advance. Built to last and high performance

One look at this product and you will know that you are getting the right thing. It looks extremely professional and sophisticated and works equally well. It is a powerful and efficient drill machine set that comes with as many as three different drill bits.

There is also the added accessory of a carry case supplemented with the product. Other useful specifications include a power rating of 500 watt and a diameter of 20 mm. The grip has been designed to be extremely soft and comfortable for ease of usage and the comfort of the user.

Also, just so that you have absolutely no problems while drilling, there is a lock on button which will let you keep drilling for prolonged periods, that is continuous drilling. There is also the fact that they have managed to include the infinite variable speed feature which can be controlled by the user and can be used for adjusting the speed in a simple manner.

With this machine, you will be able to drill through concrete, wood or metal in absolutely no time and without any difficulties. It is also highly durable and the design is built to last for a very long time.

8. Cheston 10 mm Dual Speed Drill Machine 

Cheston 10 mm Dual Speed Drill Machin

View at Amazon


  • 1200 mAh Battery Capacity; Drill – 10mm Steel, 15mm Wood; RPM 0-350 and 0-1350
  • [19 Position Clutch and 1 Positon Electric Drill] – Provides precise control for drilling into wood, metal, plastic and all screw driving tasks; Max drilling capacity is 20mm(13/16”) for wood, 10mm(3/8″) for metal
  • LED Light is suitable for working in the dark, power indicator display battery power, reversing putter button that allows you to operate by one hand
  • Ideal for drilling into wood, metal plastic and all screw driving tasks
  • 6 months warranty

Just in case you are worried about damages, this one comes with a 6 months warranty that applies on manufacturing defects. The battery inserted into the machine is 1200 mAh while the drill has been specified as 10mm for Steel and 15mm for Wood. Furthermore, if you are buying a drill, one really important feature is how fast it rotates.

This one for example, has a rotating speed of RPM 0-350 and 0-1350. There is also a 19 Position Clutch which makes drilling much easier for the average user as it provides precise and accurate control for drilling into different kinds of materials such as wood, concrete, plastic and metal. It is also fully capable of accomplishing all screw driving tasks and has a max drilling capacity of 20mm for wood and 10 mm for metal. As an added feature, an LED light has been installed on the machine which will enable the user to work even in the dark.

There is a power indicator whose function is to display the battery power left, so that you know when to plug the machine in for charging. Finally, there is also a reversing putter button that will enable you to easily operate the machine only by one hand.

9. JCB 13RHI 780W Drill Machine with Forward and Reverse

JCB 13RHI 780W Drill Machine with Forward and Reverse

View at Amazon


  • Power capacity is 780W
  • Size is 13mm
  • Drill machine with forward and reverse
  • Easy and simple to use 
  • Drill rotates at high speed
  • Product size:12.5 x 3 x weight:2.570g, 13mm – concrete 10mm- steel 25mm- wood.

JCB is an English brand which has now gained much popularity in India due to their dominion over heavy machinery and the industrial sector. They make great products which never seem to fail or malfunction and they are easily one of the most recognizable and best drill machine brand in India and the world over.

This particular drill machine comes equipped with all the latest that you might expect. It has been designed in a way that makes handling very simple and easy, and the handle itself has been built for a superior grip. The drill rotates at a high speed to let you drill holes or drive screws into different materials and is generally very efficient at what it does. The power capacity of the product has been listed as 780 Watts.

The diameter of the drill is 13 mm, while it works equally well in both directions, that is forward as well as reverse. 

10. Cheston Rotary Hammer Drill Machine 20MM 500W 

Cheston Rotary Hammer Drill Machine

View at Amazon


  • Ideal for drilling anchors and fixing holes in concrete, wood or masonry. Includes 3 drill bits for the purpose
  • Optimum drilling diameter in concrete: Up-to 20MM 
  • Single-mode SDS rotary hammer (hammer drilling)
  •  Sturdy motor with high load rating for maximum reliability
  • Lock-on button for continuous use
  • 6 months warranty 

This one comes one with a warranty that lasts for 6 months in case you run into any defects. It works great for fixing or patching up holes in concrete, masonry or wood or even drilling anchors.

Three separate drill bits have been provided to make drilling much easier for the user while the optimum drilling diameter has been specified as up to 20 mm for concrete. You can even use it for just everyday hammer drilling in materials such as concrete, masonry, and natural stone. It comes with a single-mode and that is of SDS rotary hammer, while there is also a sturdy and powerful motor attached with a high load rating that accounts for maximum reliability.

Finally, there is a lock on the button provided that will enable you to opt for continuous drilling.

Some common features of drill machine that you should know   

1.  Cordless Or With Cord

A cordless appliance will obviously be better than a corded one. Nobody would want the extra hassle of dealing with a cord when they could simply avoid it. However, that is not always the case. Sometimes, corded appliances are in fact better and we will tell you how. First of all, the obvious part is that wireless devices are definitely more easy to use. You don’t run the risk of tripping over the cord and getting yourself hurt or even messing up the drilling process because of the cord getting in the way. Also, as long as the battery remains charged, they will remain functional and will allow you to work without pause.

However, this is where things get a little tricky. The problem with cordless devices is that they need a fully charged battery to run, so unless you have that, they simply won’t function. This means that you will have to plan your drilling activity in advance and keep the batteries charged.

Also, a battery will only last for so long. Let’s say the drilling part is taking longer than usual. What if you mess up the first time you are doing it and then you have to do the whole thing all over again? If that happens, the drill will have to run for twice as long. But will it have as much power in it to keep on going for that duration? Since batteries are unreliable, you can never be sure.

However, if you were using a corded drilling machine, such a problem would never even come up because they can run endlessly as long as they are connected to a power source. All you need to do is make sure the connection is secure and you can drill away for as long as you want. Simply put, corded appliances eliminate the limitation of time and to wait for a full charge of the batteries.

Another point to be added here is that when it comes to low power drilling machines, those which lie anywhere below 18 V for example, the cordless variants are actually lighter than their corded variants. However, the situation is completely reversed when it comes to high power machines such as those which lie in the range between 18 V and 24 V. In those cases, the cordless varieties are actually heavier than the corded ones.

One more point in favour of corded drilling machines is that they tend to give much better torque and running time. While the torque applies directly to the spinning power of a drill, the running time is obviously important too as it determines how long you can drill in one go.

It has been shown statistically that cordless drilling machines tend to output less power in comparison to their corded counterparts.

Next, you need to consider the average life of both of these variants. An electronics appliance is only as good as the amount of time it lasts for. Once the average lifetime of the product is over, either it stops completely, or will function in a manner which is not quite up to the usual standards.

While it is true that sometimes you may stumble upon gadgets which may remain effectively functional for a whole lot more than what was initially promised, the general trend observed is that they tend to go on a decline after a certain period of time.

Drilling machines are no exceptions. They come with a limited lifetime. But if there is one critical part of these machines that could expire before the machine does, it is the battery. Batteries generally don’t have much of a life.

When you work with a cordless drilling machine, you have got to accept the fact that your batteries will run out sooner or later. In most cases, the time after which this happens is usually somewhere between a couple to three years. Also, there is also the fact that these batteries don’t come cheap.

What this means for you is that once the batteries have run out, it would be wiser for you to simply buy a new machine instead of investing in new batteries. And we are talking about the costliest of drilling machines here, as even those batteries won’t last more than three years.

Therefore, if you are planning to buy a cordless drilling machine, which obviously will run on batteries, make sure to plan ahead for buying another every three to four years. Corded machines, on the other hand, do not require batteries to operate.

You do not need to worry about how much charge you have left in them or plan ahead for managing new battery costs. Once you buy them, corded machines will last you for as long as ten years at a single stretch.

Talking of batteries, they are a whole new different topic to think about when it comes to cordless machines. The thing is that you can’t just go out and buy any set of batteries you find. They need to be the right kind and of the right quality. For drilling machines especially, Lithium Ion (Li-Ion) are a great bet, most of all when you compare them to Nickel-Metal-Hydride (NiMH) batteries.

The reason behind this is simply because Li-Ion batteries tend to be more powerful, in addition to the fact that they have longer lives, do not suffer from memory issues, and are generally a lot less harmful for the environment, which is a big issue right now, because they have a much lesser amount of harmful metals in them.

2. Choosing A Chuck

For those of you unfamiliar with the basic anatomy of a drilling machine, this may seem a bit confusing, so let us get some preliminary explanations out of the way first.

A chuck is nothing but something which is responsible for holding the many different bits and pieces of a drilling machine together. They are available in many different sizes and shapes and must be chosen accordingly.

The standard chuck sizes are ¼”, 3/8”, and ½” while the one which comes in a size of 3/8” is certainly the most popular one of all three. If however, you are looking for a large diameter drilling machine then you would be better off going for a 1/2″ chuck. This is solely because the 3/8″ chuck is not equipped to handle several large pieces that come with large diameter drills.

On the other hand, if the large size of drilling machines pieces is not going to be a problem for you, then we strongly suggest going for the 3/8″ chuck as it gives way better higher bit speeds in contrast to the differently sized chucks.

Once size considerations are out of the way, there is one more aspect of chucks that you must look into and decide carefully. Chucks actually come in two different categories. While the first one is the keyed variety, the second one is keyless. Going by the names, it is not difficult to imagine where the differences might lie.

The keyed variety of chucks come with a special mechanical key which can be used to loosen or tighten drilling machine bits. On the other hand, if you have opted for a keyless chuck, you would need to hold the chuck in your hand and the respective bits will be tightened as you power up the drill.

Needless to say, keyed chucks come with a mechanical advantage which is seldom missed in keyless chucks. They are able to hold on to the bits in a tighter manner and which makes it difficult for them to slip into the chuck while drilling, thus, saving you from a lot of extra trouble.

On the other hand, keyless chucks come with a few pros of their own. For starters, it is much easier to change or modify drilling machine bits and there is also the fact that you don’t have to worry about losing or misplacing the key to the chuck.

3. Essential Features

Next up, we feel it is our responsibility to introduce you to some key features that you must look for in a drilling machine. Without some of these key elements, if not all of them, you would be disappointed with your purchase. It is generally a better idea to conduct a thorough check of the product you are buying and make sure that it comes with most of the features outlined below.

Reverse Feature  

First of all, your drilling machine must come with a reverse feature. The reason why this is so important is that without it, you would never be able to dislodge or remove the bits that get stuck to your machine while drilling.

If you believe you do not explicitly need this feature since you are not using your drilling machine for driving screws, you may be quite wrong there.

Keyless chucks

Also, when it comes to keyless chucks, the drilling machines that they come with automatically have this feature by default since they have no other means to remove or dislodge the bits from the machine. The only time you will need to be careful about this feature and make sure it is actually present, is when you are buying a drill with a keyed chuck.


Next up is the variable speed feature. The feature becomes especially important when you are planning to use your drilling machine to drive screws. Even if you are not buying for that sole purpose, however, it would always be a good idea to look for it in the machine you are considering.

The reason why this is important is that it will help you drill relatively cleaner holes as certain materials come with different rigidity or toughness ratios and thus need different bit speeds in contrast to other materials.

Torque clutch

This next feature happens to be extremely important in case you are buying a drill that is to be used for driving screws. The one component you must look for in such cases is a torque clutch. A clutch will help you set and define a maximum torque value.

When this max value is reached, the drilling machine will automatically shut down. The reason why this is an essential feature is that it will prevent you from accidentally driving the screw too far into the material. It will reduce cases of accidental damages and make drilling a much safer process for you.

So these are the things you should know before buying a drill machine. Consider the points before making the decision of buying.    

Drilling machine Buying guidelines

There are varieties of drilling machines of different types, sizes, brands and functions. Some of them are for professional use; cost more and some are very handy, costs less yet performs all household repairing.

To narrow down your searches we shall be discussing their features, functions depending on your purpose of use. This buying guide is going to be an assortment of all the things you must consider before you just go and determine buying something without proper knowledge.

What to look for a drill machine before buying  

Types of Drills

Drills come in different varieties depending upon their functions.

  • Drill Drivers: The most basic type of drills with dual functionality – drills holes and acts as screwdrivers (for loosening and tightening screws). Useful for simple tasks like putting up shelves or assembling DIY furniture.
  • Combination Drills: These slightly advanced drills have triple functionality – drills holes act as screwdrivers and also acts as a hammer drill for very hard surfaces like concrete.
  • Rotary Hammer Drills/SDS Drills: SDS (Self Direct System) drills are meant for heavy-duty drilling through concrete or masonry. These are slightly bulkier but are multifunctional and can be used for chiseling too.
  • Hammer Drills/Percussion Drills: These are the most advanced and powerful drills, especially suited for extra heavy-duty drilling through hard rock or masonry. The rotation plus drill functions work together, making it more powerful than SDS drills.

Corded Drills Vs Cordless Drills

The first and foremost decision to make while buying a drilling machine is between corded and cordless. They both have some advantages and disadvantages, depending on your usage.

  • Cordless drills– they are more convenient to use. They are lighter than the cordless one and offers high mobility. You can use them anywhere without the struggle of power cords. You can avoid tripping over cords so they are quite safe.

The high powered ones (18-24v) can be heavy or even heavier than the corded ones. Usually, 12-18v is enough for all kind of homeowner’s works and 4-8 volts can perform lighter duties cordless screwdrivers.

A cordless drilling machine’s battery requires charging from time to time. You may want to keep a separate battery so you can work while it gets charged and you don’t run out of power that way. Their battery life is also limited. The costliest will last up to 2-3 years max.

Be careful with the battery they come with, Lithium-Ion batteries are always superior compared to Nickel-Metal-Hydride batteries. They are more powerful, lasts long, contain less harmful metal elements. Also, look at amp-hours, more amp-hours, and more volts batteries run a long time but the battery life will always depend on how much it functions, what material it works with, and battery charge level.

  • Corded drills- they are more powerful and often lighter than cordless drills with similar functionalities. The steady power supply runs the device for greater time and never stops because of low battery charge. An amp-hour rating denotes the power of a corded drill.
  • They are often cheaper than cordless drills. But again the power cord gets in the way restricting the area of working and portability. You will require an extension cord when working with a corded drill machine.


Chunk is the metal shaft of a drilling machine that holds the bits (the metal part that makes the hole) together. They come in different types and sizes.

  • Sizes of chucks- 1/4, 3/8, and 1/2 inch are the standard sizes. 1/4 chuck size is suitable for light duties, 3/8 is the most popular size, ideal for almost all work around the house and fits a wide range of different sized bits. However, if you want big diameter drilling machine for heavier applications, go for 1/2 inch chunks, as 3/8 inch drill will not accept several larger bits.
  • Types of chucks– there are two types of chucks in a drilling machine, namely Keyed Chuck and un-keyed chuck. They keyed chuck uses a mechanical key to loosen and tighten the drilling machine bits and in un-keyed chucks, you have to hold the chuck in your hands and the bits get tighten as you power the drill.


A good drilling machine should possess the power to penetrate through masonry and other hard surfaces. Average drilling machines have a customary 500-watt power, they can perform almost all household repairs, but you can buy lesser power machines with 450 watts if your needs are limited. While you will get some more powerful machines ranging between 600-700 watts for professional use to drill through metal substances.

Size and Weight of the Drill

A drilling machine is a hand-held tool used for boring holes in various materials. Hence, the size and weight of the drill are important factors while choosing which product to purchase, depending on your requirement.

Smaller ergonomic drills are more comfortable to use around the house while bulky drills are more suitable for heavy-duty usage.

Other Important Features

  • Reverse– it is used to get the stuck bits out of the surfaces. If your bit gets stuck inside the woods or concretes and you can’t pull it out by strength, but the machine in reverse mode and it will come out easily. It is a must-have feature in case you are not using the machine only for driving screws. A keyless chuck will have reverse by default but for others, check properly before buying.
  • RPM & Impact rate- more the RPM (revolution per minute) level smoother the drilling becomes. Also, drilling machines with a better impact rate ensures better penetration. Most of the devices match the standard RPM level and Impact rate, but if you want top-notch functionality you should consider these factors.
  • A Torque Clutch- it is a must look-into feature if you use the machine for driving screws.  With the help of a clutch, you can select the maximum torque level after which the drilling will stop. This is used to prevent from driving the screws too deep into something. Low torque and high speed is for drilling soft materials and high torque lower speed for hard materials.
  • Gear- for multipurpose use go for a driller with more than one gear. The first gear works well for driving screws and the second one is for actual drilling with higher speeds.

Additional features

While buying a drilling machine suitable for your use, look for additional features as hammering mode or screw-driver mode. A hammering mode is useful to crack some surfaces while a screw-driver mode is ideal for tightening the screws more effectively. It completely depends on what purpose you will be using it.

Drill or Kit

The whole drilling kit comprises a bunch of tools for all kinds of repairing works. It is much expensive, whereas a single drilling machine costs less as it comes with only some bits, key, chunks, and sufficient for household requirements. First, decide which one you really need and save yourself from splurging over non-required things.


Most of the drills with basic features cost around 200, some with added features for expert use can cost you 2500 or above. If you are not a professional, these may not work for you; consider buying the basic ones instead. If you need to buy the full kit along with a hammer, pliers, and wrench it will cost not less than 5000 and sometimes more.

Brand & Warranty

A good brand comes with superior build quality, reliability, and top-notch performance. A reputable brand will always offer a decent warranty period. While purchasing drilling machines try to go for the ones which provide at least 6 months of warranty.

Best Drilling Machine Brands in India

For a beginner, it becomes difficult to decide which drilling machine to go for as overall all looks the same. At that time, the brand of the drilling machine comes into the picture. The better and more popular the brand the better warranty and after-sale service you can expect. Here are some of the best drilling machine brands in India (list is in no particular order):


It is the largest automobile parts manufacturing company measured in 2011. The headquarters of Bosch is at Gerlingen, near Stuttgart, Germany on November 15, 1886. Volkmar Denner is the CEO of the company. The core manufacturing products are automobile parts like brakes, fuel systems, etc. The Bosch drillers are the best sellers in this category. They are easy to use, efficient, and handy tools.

Black & Decker

Black & Decker is an American based company and a manufacturing unit of power tools, accessories, home appliances, and hardware. The company has its headquarters in Towson Maryland. It was founded in 1910 by S.Duncan Black and Alonzo.G. Decker. However on March 12th, 2010, Black and Decker have merged with Stanley. The Black & Decker drills are very efficient and user-friendly and is slowing being one of the best selling brands in the Indian Market.


Skil Power tools include all kinds of tools required and is a subsidiary of Chevron Ltd and is a leader in portable electric tools. The skill drills have been a successor to circular saws and are also known as Skilsaws. The Skil, therefore, includes all kinds of power and electric tools. The Skill Drills are the leaders in the market and best known for their quality and efficiency.

Frequently Asked Questions

  1. How to maintain my drill?

As it is a power tool, there are simple ways to maintain your drill. The basic step is to keep your drill clean and free from any type of leftover dust and debris. It may not be an easy task as drills are used in so many different scenarios and applications. You can use a blowgun to blow away any debris and fragments. Alternatively, always check the carbon brushes inside the tool from time to time. Carbon brushes are a part of any power tool which depletes with age and use. You can use a slotted screwdriver to check if it is fine

  1. I get a burning smell while using my drill Machine. Why is it happening?

This is a very common thing among drilling machines. If you get a burning smell while using the drilling machines, it basically suggests that the motor is being overly stressed or overheating. This is applicable not only in drills but also in any power tools. This can also be an indication that the drill is being used on something that it isn’t meant for or used incorrectly. This occurs when the motor’s fans are not able to cool the motor windings fast enough leading to overheating and melting of varnish coating. It is not an alarming situation though. If you get the smell again, just withdraw it from whatever you are working on and leave the machine running. This will give time to the motors to cool down the windings and you can start working again as usual.

  1. Which is better Bosch or Black and Decker drill Machine?

There is not much difference between Black and Decker VS. Bosch cordless drill. They both can help you in getting the job done so you don’t have to worry that much when it comes to the two brands. All you have to do is to decide as to which one has the features that you need for your tasks

  1. My drill Machine always gets stuck while drilling. Taking it out is a big headache! What shall I do?

This is a very common issue among users who are new to drilling. Most drills have a reverse option. If you are stuck on a wooden or a concrete surface, it is advised to use the reverse option in drills. What it does is that it simply reverses back you to the initial position. So, you don’t have to pull anything out, the drill will pull itself out smoothly and you will never get stuck. Almost all drilling machines have this option, but you must check it on your user manual.

  1. My drill Machine isn’t working properly, what will I do now?

If your drill isn’t working right, you must enquire if your tool is still under warranty. If it is indeed under warranty, go to the place of purchase immediately and they will do the required things. If it isn’t under warranty, unfortunately, it is better you go to any agent for repairing or buy a new drill altogether. Most people choose the latter!

  1. I need a drill machine to do all my basic household repairs and needs. What power rating is suitable?

A basic 450-500 watts drilling machine is perfectly suitable for any type of household work like drilling through wood, driving screws, and simple repairs. Keep in mind; go for something that is ergonomic and easily portable or else it will be very messy and cumbersome to do any work.  Fortunately, most of the machines these days are designed well and comes with a lot of useful features.

  1. Is 20v drill Machine better than 18v?

If the 18v drill provides higher torque you should go for it. On the other hand, if the 20v drill offers better torque you should favor it over its competition. The higher the torque of a drill the better results you will get when drilling through hard surfaces.

  1. Can I use a hammer drill Machine as a regular drill?

Yes, you can use it. While a hammer drill certainly can be used as a regular drill by putting it in “Drill” mode, it has some limitations and a complete tool inventory should ideally include both. However, if you’re only going to buy one drill, a hammer drill is the more versatile of the two.

  1. What is the difference between a drill and a drill driver?

Standard power drills are primarily used for drilling holes and screwing in small fasteners. An impact driver is designed for screwing in large fasteners. Screws that are longer can be driven in much easier with an impact driver. A traditional drill is better suited for jobs that require precision.


A drilling machine is mainly a utility tool that is generally used in the construction industry. But drilling machines can also be used as a potent home improvement and repairing tool. In the above article, we provided you the best drilling machines that you can buy online in India especially for home use with buying guidelines. Decide what purpose it will serve, how much your budget is, and read our buying guide properly and then make your decision of buying the best drill machine for you.    

Compare items
  • Total (0)